EOS Trusted Purity Blog

Does my transformer contain PCBs? How to identify the risk

Written by Tom Lowcock | Nov 17, 2026

Does my transformer contain PCBs? This question is particularly relevant for older transformers or where the equipment and oil history is not fully documented. The year of manufacture, origin and previous work carried out on the transformer can provide initial indications of a potential PCB risk. However, contamination can only be reliably confirmed by analysing a representative insulating oil sample.


Which transformers could contain PCBs?

Polychlorinated biphenyls, or PCBs, were previously used in electrical equipment, among other applications, due to their beneficial performance properties. Today, PCBs are subject to strict legal requirements because of their harmful effects on human health and the environment. However, due to the long service life of transformers, PCBs can still be a relevant issue for operators of older equipment.

When assessing a potential PCB risk, it is therefore worth taking a closer look at the equipment and its history. Particular attention may be required if:

  • the transformer is older,
  • the year of manufacture or origin of the equipment is not clearly documented,
  • the history of the insulating oil is incomplete or unknown,
  • insulating oil has previously been replaced or topped up and its origin cannot be fully traced,
  • a used transformer has been purchased or taken over from another operator,
  • PCB-contaminated transformers or insulating oils have already been identified within an equipment fleet.

Existing records such as previous laboratory reports and analysis data, as well as information on oil changes and maintenance work, can be helpful. The more complete the documentation, the easier it is to make an initial assessment of whether there may be a PCB risk.

However, these factors are indicators, not proof. Although older transformers often contain PCBs, this is not automatically the case. Equally, PCB contamination cannot be ruled out simply because there is no indication of it in the available documentation.

Determining whether PCBs may be present is also important from a legal perspective: PCBs are subject to strict legal requirements in the EU. Depending on the concentration identified, specific requirements may apply to the handling of the insulating oil and the transformer. We explain the applicable limits and what they mean for operators in more detail in this article:

 

How can I reliably determine whether my transformer contains PCBs?

An analysis of the insulating oil provides certainty. A representative oil sample is taken from the transformer and tested for PCBs. Specialised service provider for transformer oils and maintenance, such as Electrical Oil Sevices (EOS), exist to take on this task for you.

At its laboratories in Hamburg and Stanlow, Electrical Oil Services offers comprehensive transformer oil analysis, including the determination of PCB content in insulating oils. A representative oil sample provides the basis for assessing the PCB content of the insulating oil. We explain how to take a representative sample from a transformer and what needs to be considered in this article:

This makes it possible to investigate an initial suspicion and determine whether PCBs are present in the insulating oil tested and, if so, at what concentration.

 

PCBs detected in the transformer – what happens next?

If PCBs are detected during the analysis, the specific findings and the requirements applicable to the equipment need to be considered. The next steps required depend, among other factors, on the PCB concentration identified as well as legislation and rules around PCB disposal for the particular geographical location of the transformer.

PCB contamination does not necessarily mean that the entire transformer has to be disposed of. We explain the options available for removing PCBs from transformers in this interview:

 

Stay informed with our EOS Trusted Purity Blog!

 

 

Conclusion: Identify PCB risks in transformers and gain clarity

The year of manufacture, equipment history and available documentation can help identify transformers with a potential PCB risk. Whether PCBs are actually present can be determined only by analysing a representative insulating oil sample. This provides operators with a reliable basis for assessing the findings and planning the next steps.

Are you unsure whether a transformer in your equipment fleet could contain PCBs? Electrical Oil Services can support you with sampling, PCB analysis and the assessment of the results.

 

 

FAQs: PCBs in transformers

Can a transformer that was originally PCB-free become contaminated with PCBs later?

The subsequent oil history of a transformer should be taken into account. If insulating oil has been replaced or topped up during its service life, the origin of the oils used and any potential previous contamination may be relevant to the assessment.

When is a PCB analysis of transformer oil advisable?

A PCB analysis may be particularly advisable for older transformers or equipment with incomplete documentation and an unknown oil history. It can also be important to establish the PCB status of transformers that have been taken over or purchased second-hand.

Which documents can help assess a PCB risk?

Information on the transformer's year of manufacture and origin, as well as previous laboratory reports and analysis data, can be particularly helpful. Documented oil changes, top-ups and maintenance work can also provide important information about the oil history.

What should be done if transformers contain PCBs?

The measures required depend, among other factors, on the PCB concentration measured and the applicable legal and regulatory requirements. The analysis result should therefore be professionally assessed and the next steps tailored to the individual transformer.